• <optgroup id="gwcg8"><optgroup id="gwcg8"></optgroup></optgroup>
  • <xmp id="gwcg8">
     Home > NewsNews

    Reducer gears

    View: 123404/27/2017  

    Reducer gears(Helical Gears)

    Gear set

    This is a routine inspection and maintenance of the customer's reducer. The company has the ability to large-scale reducer testing and maintenance.

    Helical gears belong, by the gear shaft classification, to parallel axes gears and are cylindrical gears in which the teeth are twisted as a helix line.

    The shape of a helical gear is given by stacking infinitesimally thinly sliced spur gears and twisting them uniformly around the shaft.  Differentiating by the direction of the twist, the right-hand and the left-hand helical gears are obtained.  Also, for a pair of helical gears, the twist angles are the same but are of the opposite hands.

    By slanting the teeth, helical gears can obtain a large contact ratio and the gradual change to the contact surface load which give helical gears their characteristic of smooth transmission of rotation. Consequently, compared to spur gears, helical gears have less vibration, are quieter and are suitable for high speed rotation applications and can transmit high load.

    On the other hand, the use of helical gears produces axial thrust, which is a drawback, and requires countermeasures such as installing thrust bearings.  For that reason, in order to eliminate thrust, there exists such items as herringbone gears that combine the right and left hand gears into one body.

    On the teeth pitch surfaces of helical gears, there exist two non-interchangeable systems: the normal to tooth system (normal module) and perpendicular to gear shaft system (transverse module). The normal module system has some advantages such as these gears can be made with the same teeth cutting hobs and grinding stones as used for spur gear production.  On the other hand, there are disadvantages such as when replacing them with spur gears, the center distance changes and it is difficult to make the center distance an integer. The transverse module system has the advantage of being able to replace helical gears with spur gears of the same module and the number of teeth without changing the center distance. However, they have the disadvantage of requiring specialized hobs and grinding stones for production.

    Incidentally, if using a pair of helical gears, they transmit rotational motion, but by pairing with a gear rack having straight slanted tooth form, they can also be used in linear motion applications.  Also, by meshing helical gears with off-set shafts, they can be used as screw gears.

    Related products
    Ring forging
    Ring forging
    Crane drum
    Crane drum
    Spiral bevel gear
    Spiral bevel gear
    Spur gear
    Spur gear
    View More(Total0)Comment Lists
    No Comment
    I want to comment
    Content *
    Verification Code*
    Vi?t Nam